FMX004 ESD Tester Machine

FMX-004 electrostatic field reflectoscope reflector is a non-contact portable electrostatic field measuring instrument is surveys the object surface static electricity value and the survey static electricity eliminates equipment's ion trim

Easy to read, easy to use operation

Light weight, compact design

Range light assures accurate and repeatable measurements

Digital and bar graph display

Automatic power off after five minutes (may be disabled if preferred)

Measuring range: 0 to ±1.49KV ( Low range)

±1.0kV to ±30.00kV ( High range)

(range hysteresis: ±1.0kV to ±1.5kV)

0 to ±300V ( low balance measuring range)

Measuring distance: 1"±1/64" ( 25mm±0.5mm), LED guide for correct distance

( between object and field meter)

Response time: <1s

LCD display renewal rate: 5 times/s

Accuracy: ±10%

Ambient conditions: 50°-100°F, (10°- 40°), 0-60%RH ( non-condensing)

Display features: Bar graph, red LCD positive polarity voltage, blue LCD negative polarity voltage

Bar graph precision: ±0.1kV for low range ±2kV for high range,±20V for ion balance range

Digital reading: Auto-ranging , three digits x.xx=0 to ±1.49kV,xx.x=±1.0kV to ±30.0kV(Hi),xxx=0 to 300 ( lon balance)

lon balance mode display: (IB) is displayed

Battery capacity display indicatoror

HOLD switch to retain display after measurement

Error sign (ERR) appears if the sensor is damaged

Alarm feature: Beep sound will be heard during the following actions;

Power on: one beep

Power on with auto Off feature disabled: {Depress power button for more than 3 seconds three beeps

Auto power-Off : short beeps at 1 seconds interval for 5 seconds before power off

Over range: continuous sound

Auto power-off: Power turns off automatically after five minutes, A OFF is display whenever this features is disabled

Power source: 9V, manganese battery (Battery Not Included because of Shipping Policy)

Battery life: In excess of 30 hours

Size: 123mm (L) x 73mm (W) x 25mm (D)

Weight: 170g

Case material: Conductive resin( ABS)